|
 ULTRAPROBE® 2000
How Ultrasonic Technology Works for You
The Ultimate in Ultrasonic Inspection & Predictive Maintenance
Flexible - Adaptable
Recognizing that every test environment is different, UE Engineers designed
the Ultraprobe with many user friendly features, so that it can be adapted to
approach almost any inspection problem.
Frequency Tuning allows the operator to select the specific
frequency of a problem sound while reducing interference from competing
ultrasonic signals.
Bi-Modal Meter Switch has two meter
functions:
Logarithmic Metering which provides instant real time response
for
enhanced leak and fault detection, Linear Mode for bearing and mechanical
monitoring, which accommodates an expanded range of sound that is averaged for
stabilized readings.
A Ten-Turn Sensitivity Adjust Dial covers a wide range of
ultrasonic
signal reception so that users may detect subtle mechanical and
leak
problems as well as focus in on gross signals for accurate analysis.
Trisonic Scanning Module
This patented transducer
consists of a phased array of three transducers which provides a level of
sensitivity beyond anything previously obtainable.
Acoustic Headphones
Noise isolating type: double headset
wired monophonic. Impedance, 16 ohms. Over 23 dB of noise attenuation. Meets or
exceeds ANSI specifications and OSHA standards.
Intrinsically Safe, Class I, Division 1, Groups A B C & D,
Factory Mutual.
Kit Includes:
Ultrasensitive ultrasonic detector which
features:
Frequency Selection (20 kHz - 100 kHz) Control with calibrated
detent for wideband and ultra-narrow band modes; precision edgewise meter; 3-way
meter/auxiliary mode selector; numerically calibrated 10-turn attenuator
control; rechargeable batteries with low-level indicator light;
anodized
aluminum housing; Trisonic Scanner Module (for airborne
ultrasound);
Stethoscope Module (for internal analysis); 31 inch Stethoscope Extension Kit;
Rubber Focusing Probe; high-power frequency modulation Warble Tone Generator
with adjustable power output; deluxe noise isolating headset; and
Zero-Haliburton aluminum travel case. Intrinsically Safe Class 1, Division 1,
Groups A, B, C, & D. Instruction Manual and VHS Video Training Tape.
Included with every ULTRAPROBE
This professionally produced series was shot in actual plant environments .
Viewers will see, hear and experience realistic test examples with practical
solutions. The training program is applicable to all levels of ultrasonic
testing experience. Arranged in a practical format, viewers are taken step by
step through each application. This VHS videotape is available in NTSC or PAL.
Each program includes:
- An Introduction to Airborne Ultrasound
- A Review of Each Ultraprobe Feature
- An Overview of the Specific Application
- A Demonstration of Testing Techniques
- Problem Solving Techniques
| UE Systems ULTRAPROBE 2000 Series Application Selection
Chart |
Application Kit
# |
UP2000KT |
UP2000SC |
UP2000STG |
UP2000C |
UP2000S |
| Pressure & Vacuum Leak Detection |
Y |
Y |
Y |
- |
Y |
| Hydraulic Valve Bypass |
Y |
Y |
- |
Y |
- |
| Exhaust System Leaks |
Y |
Y |
Y |
- |
Y |
| Heat Exchangers, Boilers, Condensers |
Y |
Y |
Y |
- |
Y |
| Valve & Steam Trap Inspection |
Y |
Y |
- |
Y |
- |
| Bearing Testing |
Y |
Y |
- |
Y |
- |
| Gear/Gear Box Inspection |
Y |
Y |
- |
Y |
- |
| Cockpit Window Leaks |
Y |
- |
Y |
- |
- |
| General Mechanical Inspection |
Y |
Y |
- |
Y |
- |
| Tanks, Pipes, Leak Testing, etc. |
Y |
Y |
Y |
- |
Y |
| Electrical Inspection |
Y |
Y |
Y |
- |
Y |
| ULTRAPROBE 2000 Specifications |
| Construction: |
Hand held metered pistol type made with anodized aluminum
and ABS plastic |
| Circuitry: |
Solid state heterodyne receiver with temperature
compensation. |
| Frequency Response: |
Detect ultrasonic frequencies between 20 kHz and 100 kHz,
continuously variable. Frequencies are converted to 50 Hz to 3 kHz
audio. |
| Probes: |
Scanning Module patented TRISONIC plug-in
type consisting of a phased array of multiple transducers for airborne
ultrasound. This probe is shielded against RF
interference.
Rubber Focusing Probe (flexible) slips
over scanning module to concentrate conical directivity and to shield
reception of stray ultrasound. Also fits over Stethoscope Module to shield
against high ambient ultrasound while unit is at maximum
sensitivity.
Stethoscope Module: plug-in type,
insulated probe with RF shielding; 4 1/2 (11.4 cm) long stainless steel
probe tip, conically shaped for uniform surface contact. Probe tip is
interchangeable. Stethoscope Extension Kit: 3 piece, segmented metal rods
to increase stethoscope contact range 20 (50.8 cm) and 31 (76.2
cm). |
| Transmitter: |
Patented warble tone transmission |
| Headset: |
Noise isolating type: double headset wired monophonic.
Impedance, 16 ohms. Over 23 dB of noise attenuation. Meets or exceeds ANSI
specifications and OSHA standards. |
| Indicators: |
Ballistic output meter: linear calibration scale of 0 - 100
for logging relative measurements. Meter is accurate 1% throughout entire
scale. Low Level Battery LED indicator for main housing internal power
supply. |
| Batteries: |
Self contained Ni-MH rechargeable. RECHARGING SYSTEM:
Standard 110V. Also available in 220 V. |
| Features: |
Frequency tuning adjustment dial: Scale 20
- 100 kHz with fixed band position for ultra-narrow frequency
response.
Bi-Modal Meter Switch for logarithmic and
linear meter scale adjustments.
Optional auxiliary
mode selection for chart recorder output: 0 - 50
mV
Sensitivity Control, Precision 10 turn adjustment
dial with numerically calibrated sensitivity increments for finite gain
adjustment.
Spring loaded trigger switch. |
| Over-All Size: |
Complete kit in Zero Haliburton aluminum carrying
case:
15 X 22 X 7 (38.1 X 55.9 X 17.8 cm)
Pistol Unit: 2 lbs. (.9
kg)
Complete carrying case: 14 lbs. (6.4 kg) |
| Sensitivity: |
Detects .005 (.127 mm) diameter leak @ 5psi (.34 bar) at a
distance of 50 ft. (15.24 m) |
| Threshold*: |
1 X 10-2 std. cc/sec to 1 X 10-3 std. cc/sec. freon |
|
