บริษัท เทอร์โมสแกน จำกัด
| Home |
| Infrared Cameras |
| Vibration Analysis |
| Ultrasonic UE |
| Motor Circuit Analysis |
| Night Vision |
| Thermoscan Services |
| Infrared Training |
| Thermoscan Link |
| Contact Us |
| หลักสูตรอบรมอินฟราเรด ระดับ 1 ระดับ 2 ตามมาตรฐานสากล |
|
| Airborne Ultrasound Training หลักสูตรแอร์บอร์นอัลตร้าซาวด์ อบรมหลักสูตร ระดับ1 December 17 - 20, 2012 |
Automotive - car seat heating
Engines manufacturing
Food processing
Automation: speed up your design cycle with infrared
The FLIR A315 camera has features and functions that make it the natural choice for anyone who uses PC software to solve problems and for whom
320 X 240 pixel resolution is sufficient. Among its main features are GigE Vision
and GenICam compliance, which makes it plug-and-play when used
with software packages such as IMAQ Vision and Halcon.
Features
• Affordable
• GigE compliant
• GenICam compliant
• Trigg/synchronization/GPIO
• 16-bit 320 X 240 images @ 60 Hz, signal, temperature linear, and radiometric
• Compliant with any software that supports GenICam, including National
• Instruments IMAQ Vision and Stemmers Common Vision Blox
• Lenses: 25° included, 15° and 45° optional
• Slag detection
• Food processing
• Electronics testing
• Power resistor testing
• Automotive
• Car seat heating
• Verification of window defrosting
• Heating, air conditioning functions
• Casting of plastic or metallic parts
• Quality checking of laminated parts such as dashboards
• Quality checking of leather upholstery
• Friction control of tires
• PCB testing, validation and verification
• Fault tracing in board assemblies
• Power electronics design
| FLIR ThermoVision A315 Specifications | |
| Imaging Performance | |
| Field of view (FOV) Minimum focus distance Focal Length Spatial resolution Lens identification F-number Thermal sensitivity/ NETD Image frequency Focus |
25° X 18.8° 0.4m 18mm 1.36mrad Automation 1.3 <0.05°C @ + 30°C/ 50mK 60Hz Automatic or manual (built in motor) |
| Detector data | |
| Detector type Spectral range IR resolution Detector pitch Detector time constant |
Focal Plane Array (FPA), uncooled microbolometer 7.5-13µm 320 X 240pixels 25µm Typical 12ms |
| Measurement | |
| Object temperature range Accuracy |
-20°C to + 120°C 0 to +350°C ±2°C or ±2% of reading |
| Measurement analysis | |
| Atmosphere transmission | Automatic, based on inputs for distance, |
| correction | atmospheric temperature and relative humidity |
| Optics transmission correction | Automatic, based on signals from internal sensors |
| Emissivity correction | Variable from 0.01 to 1.0 |
| Reflected apparent | Automatic, based on input of reflected temperature |
| Reference temperature | Manually set or captured from any measurement function |
| temperature correction |
|
| External optics/ | Automatic, based on input of optics/ window |
| Emissivity correction | Variable from 0.01 to 1.0 |
| windows correction | transmission and temperature |
| Measurement corrections | Global object parameters |
| Ethernet | |
| Ethernet | Control and image |
| Ethernet, type | Gigabit Ethernet |
| Ethernet, standard | IEEE 802.3 |
| Ethernet, connector type | RJ-45 |
| Ethernet, communication | TCP/IP socket-based FLIR proprietary and GenICam protocol |
| Digital input/ output | |
| Digital input, purpose | Image tag (start/ stop/ general), Input ext. device (programmatically read) |
| Digital input | 2 opto-isolated, 10-30 VDC |
| Digital output, purpose | Output to ext. device (programmatically set) |
| Digital output | 2 opto-isolated, 10-30 VDC, max 100mA |
| Digital I/O, isolation voltage | 500VRMS |
| Digital I/O, supply voltage | 12/24 VDC, max 200 mA |
| Digital I/O, connector type | 6-pole jackable screw terminal |
| Power system | |
| External power operation | 12/24 VDC, 24W absolute max |
| External power, connector type | 2-pole jackable screw terminal |
| Voltage | Allowed range 10-30 VDC |
| Environmental data | |
| Operating temperature range | -15°C to +50°C |
| Storage temperature range | -40°C to +70°C |
| Humidity (operating and storage) | IEC 60068-2-30/24 h 95% relative humidity +25°C to +40°C |
| EMC | - EN 61000-6-2:2001 (Immunity) - EN 61000-6-3:2001 (Emission) - FCC 47 CFR Part 15 Class B (Emission) |
| Encapsulation | IP 40 (IEC 60529) |
| Bump | 25g (IEC 60068-2-29) |
| Vibration | 2g (IEC 60068-2-6) |
| Physical data | |
| Weight | 0.7kg |
| Camera size (L x W x H) | 170 X 70 X 70mm |
| Tripod mounting | UNC1/4-20 (on three sides) |
| Base mounting | 2 X M4 thread mounting holes (on three sides) |
| Housing material | Aluminium |
| Composite video | |
| Video out | Composite video output, PAL and NTSC compatible |
| Video, standard | CVBS (ITU-R-BT.470 PAL/ SMPTE 170M NTSC) |
| Video, connector type | Standard BNC connector |
| Power system | |
| External power operation | 12/24 VDC, 24W absolute max |
| External power, connector type | 2-pole jackable screw terminal |
| Voltage | Allowed range 10-30 VDC |
| Environmental data | |
| Operating temperature range | -15°C to +50°C |
| Storage temperature range | -40°C to +70°C |
| Humidity (operating and storage) | IEC 60068-2-30/24 h 95% relative humidity +25°C to +40°C |
| EMC | - EN 61000-6-2:2001 (Immunity) - EN 61000-6-3:2001 (Emission) - FCC 47 CFR Part 15 Class B (Emission) |
| Encapsulation | IP 40 (IEC 60529) |
| Bump | 25g (IEC 60068-2-29) |
| Vibration | 2g (IEC 60068-2-6) |
| Physical data | |
| Weight | 0.7kg |
| Camera size (L x W x H) | 170 X 70 X 70mm |
| Tripod mounting | UNC1/4-20 (on three sides) |
| Base mounting | 2 X M4 thread mounting holes (on three sides) |
| Housing materia | Aluminium |